DH610 TRANSPORTABLE PROFILE CUTTING MACHINE
Here is the perfect solution to small cutting jobs around the workshop. The DH610 is a compact, truly transportable profile cutting machine designed to be taken to, and mounted on, the actual plate to be cut. It is the ideal machine for workshops with limited overhead crane facilities and those requiring a low cost system which will not occupy a permanent location on the shop floor.

The DH610 is a full specification profile cutting machine capable of producing intricate shapes from simple black line templates.
It features as standard, the state-of-the-art Burny Etek Replicator 1000, optical line following control system which both simplifies operation and ensures optimum accuracy. The Replicator 1000 features automatic 'Lead-in' and 'Lock-on' and clockwise or counter clockwise tracing. The tracing system will automatically stop motion if for any reason, it goes off pattern.
The operator control panel has the following features:-

  • Eight direction jog switch
  • Kerf compensation
  • Speed potentiometer
  • Speed range selector
  • Oxygen On/Off/Auto
  • Power On/Off

Specification
The standard DH610 is supplied with - a single oxy-fuel gas torch, - a set of nozzles for cutting thicknesses up to 60mm - Burny Etek Replicator 1000 control and drives - tracing table - gas distribution manifold and hoses.

Maximum Tracing Width 610mm
Maximum Cutting Width 610mm
Maximum Cutting Length 610mm
Infinitely variable speed up to 3 metres/min.
Typical; Cutting thickness 3mm - 100mm